C2PH(1)          Perl Programmers Reference Guide         C2PH(1)


NAME
       c2ph, pstruct - Dump C structures as generated from cc -g
       -S stabs



SYNOPSIS
           c2ph [-dpnP] [var=val] [files ...]


       OPTIONS


           Options:

           -w  wide; short for: type_width=45 member_width=35 offset_width=8
           -x  hex; short for:  offset_fmt=x offset_width=08 size_fmt=x size_width=04

           -n  do not generate perl code  (default when invoked as pstruct)
           -p  generate perl code         (default when invoked as c2ph)
           -v  generate perl code, with C decls as comments

           -i  do NOT recompute sizes for intrinsic datatypes
           -a  dump information on intrinsics also

           -t  trace execution
           -d  spew reams of debugging output

           -slist  give comma-separated list a structures to dump


DESCRIPTION
       The following is the old c2ph.doc documentation by Tom
       Christiansen <tchrist@perl.com> Date: 25 Jul 91 08:10:21
       GMT

       Once upon a time, I wrote a program called pstruct.  It
       was a perl program that tried to parse out C structures
       and display their member offsets for you.  This was
       especially useful for people looking at binary dumps or
       poking around the kernel.

       Pstruct was not a pretty program.  Neither was it
       particularly robust.  The problem, you see, was that the C
       compiler was much better at parsing C than I could ever
       hope to be.

       So I got smart:  I decided to be lazy and let the C
       compiler parse the C, which would spit out debugger stabs
       for me to read.  These were much easier to parse.  It's
       still not a pretty program, but at least it's more robust.

       Pstruct takes any .c or .h files, or preferably .s ones,
       since that's the format it is going to massage them into
       anyway, and spits out listings like this:




31/Oct/1999            perl 5.005, patch 03                     1





C2PH(1)          Perl Programmers Reference Guide         C2PH(1)


        struct tty {
          int                          tty.t_locker                         000      4
          int                          tty.t_mutex_index                    004      4
          struct tty *                 tty.t_tp_virt                        008      4
          struct clist                 tty.t_rawq                           00c     20
            int                        tty.t_rawq.c_cc                      00c      4
            int                        tty.t_rawq.c_cmax                    010      4
            int                        tty.t_rawq.c_cfx                     014      4
            int                        tty.t_rawq.c_clx                     018      4
            struct tty *               tty.t_rawq.c_tp_cpu                  01c      4
            struct tty *               tty.t_rawq.c_tp_iop                  020      4
            unsigned char *            tty.t_rawq.c_buf_cpu                 024      4
            unsigned char *            tty.t_rawq.c_buf_iop                 028      4
          struct clist                 tty.t_canq                           02c     20
            int                        tty.t_canq.c_cc                      02c      4
            int                        tty.t_canq.c_cmax                    030      4
            int                        tty.t_canq.c_cfx                     034      4
            int                        tty.t_canq.c_clx                     038      4
            struct tty *               tty.t_canq.c_tp_cpu                  03c      4
            struct tty *               tty.t_canq.c_tp_iop                  040      4
            unsigned char *            tty.t_canq.c_buf_cpu                 044      4
            unsigned char *            tty.t_canq.c_buf_iop                 048      4
          struct clist                 tty.t_outq                           04c     20
            int                        tty.t_outq.c_cc                      04c      4
            int                        tty.t_outq.c_cmax                    050      4
            int                        tty.t_outq.c_cfx                     054      4
            int                        tty.t_outq.c_clx                     058      4
            struct tty *               tty.t_outq.c_tp_cpu                  05c      4
            struct tty *               tty.t_outq.c_tp_iop                  060      4
            unsigned char *            tty.t_outq.c_buf_cpu                 064      4
            unsigned char *            tty.t_outq.c_buf_iop                 068      4
          (*int)()                     tty.t_oproc_cpu                      06c      4
          (*int)()                     tty.t_oproc_iop                      070      4
          (*int)()                     tty.t_stopproc_cpu                   074      4
          (*int)()                     tty.t_stopproc_iop                   078      4
          struct thread *              tty.t_rsel                           07c      4

       etc.

       Actually, this was generated by a particular set of
       options.  You can control the formatting of each column,
       whether you prefer wide or fat, hex or decimal, leading
       zeroes or whatever.

       All you need to be able to use this is a C compiler than
       generates BSD/GCC-style stabs.  The -g option on native
       BSD compilers and GCC should get this for you.

       To learn more, just type a bogus option, like -\?, and a
       long usage message will be provided.  There are a fair
       number of possibilities.

       If you're only a C programmer, than this is the end of the
       message for you.  You can quit right now, and if you care



31/Oct/1999            perl 5.005, patch 03                     2





C2PH(1)          Perl Programmers Reference Guide         C2PH(1)


       to, save off the source and run it when you feel like it.
       Or not.

       But if you're a perl programmer, then for you I have
       something much more wondrous than just a structure offset
       printer.

       You see, if you call pstruct by its other incybernation,
       c2ph, you have a code generator that translates C code
       into perl code!  Well, structure and union declarations at
       least, but that's quite a bit.

       Prior to this point, anyone programming in perl who wanted
       to interact with C programs, like the kernel, was forced
       to guess the layouts of the C strutures, and then hardwire
       these into his program.  Of course, when you took your
       wonderfully crafted program to a system where the sgtty
       structure was laid out differently, you program broke.
       Which is a shame.

       We've had Larry's h2ph translator, which helped, but that
       only works on cpp symbols, not real C, which was also very
       much needed.  What I offer you is a symbolic way of
       getting at all the C structures.  I've couched them in
       terms of packages and functions.  Consider the following
       program:

           #!/usr/local/bin/perl

           require 'syscall.ph';
           require 'sys/time.ph';
           require 'sys/resource.ph';

           $ru = "\0" x &rusage'sizeof();

           syscall(&SYS_getrusage, &RUSAGE_SELF, $ru)      && die "getrusage: $!";

           @ru = unpack($t = &rusage'typedef(), $ru);

           $utime =  $ru[ &rusage'ru_utime + &timeval'tv_sec  ]
                  + ($ru[ &rusage'ru_utime + &timeval'tv_usec ]) / 1e6;

           $stime =  $ru[ &rusage'ru_stime + &timeval'tv_sec  ]
                  + ($ru[ &rusage'ru_stime + &timeval'tv_usec ]) / 1e6;

           printf "you have used %8.3fs+%8.3fu seconds.\n", $utime, $stime;

       As you see, the name of the package is the name of the
       structure.  Regular fields are just their own names.  Plus
       the following accessor functions are provided for your
       convenience:






31/Oct/1999            perl 5.005, patch 03                     3





C2PH(1)          Perl Programmers Reference Guide         C2PH(1)


           struct      This takes no arguments, and is merely the number of first-level
                       elements in the structure.  You would use this for indexing
                       into arrays of structures, perhaps like this

                           $usec = $u[ &user'u_utimer
                                       + (&ITIMER_VIRTUAL * &itimerval'struct)
                                       + &itimerval'it_value
                                       + &timeval'tv_usec
                                     ];

           sizeof      Returns the bytes in the structure, or the member if
                       you pass it an argument, such as

                               &rusage'sizeof(&rusage'ru_utime)

           typedef     This is the perl format definition for passing to pack and
                       unpack.  If you ask for the typedef of a nothing, you get
                       the whole structure, otherwise you get that of the member
                       you ask for.  Padding is taken care of, as is the magic to
                       guarantee that a union is unpacked into all its aliases.
                       Bitfields are not quite yet supported however.

           offsetof    This function is the byte offset into the array of that
                       member.  You may wish to use this for indexing directly
                       into the packed structure with vec() if you're too lazy
                       to unpack it.

           typeof      Not to be confused with the typedef accessor function, this
                       one returns the C type of that field.  This would allow
                       you to print out a nice structured pretty print of some
                       structure without knoning anything about it beforehand.
                       No args to this one is a noop.  Someday I'll post such
                       a thing to dump out your u structure for you.

       The way I see this being used is like basically this:

               % h2ph <some_include_file.h  >  /usr/lib/perl/tmp.ph
               % c2ph  some_include_file.h  >> /usr/lib/perl/tmp.ph
               % install

       It's a little tricker with c2ph because you have to get
       the includes right.  I can't know this for your system,
       but it's not usually too terribly difficult.

       The code isn't pretty as I mentioned  -- I never thought
       it would be a 1000- line program when I started, or I
       might not have begun. :-)  But I would have been less
       cavalier in how the parts of the program communicated with
       each other, etc.  It might also have helped if I didn't
       have to divine the makeup of the stabs on the fly, and
       then account for micro differences between my compiler and
       gcc.

       Anyway, here it is.  Should run on perl v4 or greater.



31/Oct/1999            perl 5.005, patch 03                     4





C2PH(1)          Perl Programmers Reference Guide         C2PH(1)


       Maybe less.

        --tom






















































31/Oct/1999            perl 5.005, patch 03                     5